Questions & Answers for: Cisco model 2950

switch port i have created vlan in 2950 switch but sometime one of the port turns into orange instead of green. switch setting int f0/1 speed 100 dup full and lan card shuld be shud be more then ...

cisco 2950 series hello, J ' have a switch 2950 and not boot normally, the led system is orange and it blinking Help me please Go here http://www.cisco.com/en/US/products/hw/switches/ps628/ They have ...

...themselves don't have an IP address. The switch has one IP address for online configuration. this model does switching only and doesn't use DHCP to issue addresses we do this for security purpuse ...

Switch 2950 24 ports with problems I have a switch of 48 ports , i configured all th eports with 2 vlan , 1 access vlan and 1 voice vlan. For some reason , a specific port stop working , and the ...

For configure 2 VLAN that means 2 class IP Address (exm: VLAN 1 Class B, VLAN Class C) How Communicate one to another. Please give codding Here is an example. ...

Cisoc 2950 with odd Problem I have Cisco 2950 24 Port Switch I can access via console I can change configurations. I can reset the Switch everything appears normal and works normal that way. But I ...

IP IOS Command not working with switch 2950-B>en 2950-B#config t 2950-B(config)#int fa0/1 2950-B(config-if)#ip address 172.225.18.100 255.255.254.0 ^ % Invalid input detected at '^' marker What am I ...

How to reset the cisco catalyst 2940 switch throught console by reset, do you mean reboot? if so type reload if resetting to factory type erase startup-config

how to restore config from backup config to WS-C2950C-24 copy tftp://.... flash:/....

i have two 2950 switches and try to connect them through gi-ports but no response they may have different LAN Ip addresses