Questions & Answers for: Pride Mobility Products mobility scooter beep codes

...beep code 5 is a brake fault. The scooter may be in freewheel mode or there may be a short in the brake. Make sure the scooter is in drive mode with the rear brake lever in the correct position. If ...

...scooter, a beep code of 5 indicates a solenoid brake trip. This means that the brake manual/freewheel lever may be in the freewheel position. This means that you can push the scooter. Remove the key ...

...beep code of 6 indicates a bad throttle potentiometer or a throttle potentiometer which is out of neutral on start up. You can test for this by turning off the scooter and attempting to try various ...

...beep solenoid brake trip code sounds, and the scooter won't go. first of all take a look at the microswitch connected to the brake, these can fail, check the connections from the axle to the frame ...

Beeping Code 9 Beeps 9 times wont move 9 BARS: The parking brakes have a bad connection or have a failed solenoid, or any lever or switches that disconnect drive for pushing the chair manually may be ...

Beep code 5 keeps going off, the manual freewheel lever is in the drive position. Can I repair it? Hi remove the key for a short while make sure freewheel lever is in drive & replace key & try

...scooter and when i move lever to forward or reverse all it does is click but no movement everything is in the positions as required and all it does is click Have you checked the speed pot is not ...

beep codes beeps 5 beep solenoid brake trip how to fix Contact a local DME dealer in your area or, on the internet. Give them your serial number for the GOGO to order a new solenoid brake. It is ...

...beep code mean on my Pride Victory 10 scooter mean when I turn the key on ? This is a speed pot or throttle control problem (wig-wag) have you had some speed issues with the scooter before this ...

...done by a mobility center who will plug a pp1a/b penny and giles programmer into the 4 pin plug from the sdrive controller select the beep and turn it off ,there is no other way of doing this ...