Questions & Answers for: Chevrolet Avalanche mm to inch

Question about 2004 Avalanche

1 Answer

chev avalanche 2004 inner tie rods removal of inner tie rods on a 2004 chev. avalanche I was able to fix the inner tie rod problem with a little of patients and 90 bucks for the parts. When I took it ...

Ad

a/c only blows on 4-5 levels not 1-3 chevy avalanche 1500 2003 You have blown your blower resister ,it will be close to your blower motor,and farley easy to rplace remove your glove box and you will ...

Ad

2003 CHEVY AVALANCHE dash board telling me left 2003 CHEVY AVALANCHE dash board telling me '' left rear door ajar'', it's not. What is the problem? check the lil switch that'll be located on the latch

Question about 2003 Avalanche

1 Answer

3003 Chevrolet avalanche says ''left rear door ajar''. Whats the problem? check the contact switch that'll be either located directly behind the latch anchor on the frame of the car or within two ...

where is the fuel filter located on 2005 alavanche this is located on the drivers side frame rail, just under the drivers door its about 2-3 inch diameter and about 5 inchs long

had to change the battery now the ac is not blowing cool air but hot Just a guess - but a place to start... Check the ground wires on the computer module (black box) that attach to the battery cable ...

...mm (1 1/8 inch) socket. 4. In order to shear the plastic retaining ring on the bearing cup, place J 9522-3 on the open horizontal bearing cups. Press the lower bearing cup out of the yoke ear. 5. If ...

...what size and type of engine I have in my 2003 Chevy Avalanche 5.3 liters V8 front engine with 96 mm bore, 92 mm stroke, 9.5 compression ratio, overhead valve and two valves per cylinder ...

I'm trying to change my spark plugs and can't get the boot off of the plugs. Is there a tool that I can purchase that can remove the spark plug wire from the spark plug? Thanks, Jeff spark plug boot ...

Question about 2002 Avalanche

1 Answer

...mm (1.122 inch) Rotor Minimum Allowable Thickness After Refinish ....... 29.0 mm (1.142 inch) Rotor Thickness-new .................................... 30.0 mm (1.181 inch) Rotor Maximum Allowable ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...