Questions & Answers for: Xerox mm to inch

...button to modify the X dimension of the custom paper size. The value range is from 147.32 to 457.2 mm (5.8 to 18.0 inches). Select the [Right] or [Left] arrow button to modify the Y dimension of the ...

...mm (Letter, 8.5 x 11 inch) paper in Paper Tray 5 (Bypass Tray). Select [Print Test Original] to print a sample of the settings. The message 'Please wait?Printing test original' will be displayed and ...

actuality, it takes about 10 minutes. Make sure you have either some magnetic Torx drivers or a 5.5 MM nut driver to remove the screwws

.../ Space Requirements for the 5328 5328 Physical Dimensions : Weight 110 kg (241 lb) Length 762 mm (30 inches) Width 736.6 mm (29 inches) Height 1067 mm (42 inches) The following is the area that ...

...Inch DL110 mm x 220 mm4 x 8.6 Inch Enter the short edge and long edge values for the envelope size you are using. The driver will now show the new custom size as one of the choices in Output Size. ...

...workcenter pro 416 pi or si width diameter height weight Actual Machine Dimensions: Width: 530 mm / 21 inches Depth: 577 mm / 23 inches Height: 1039 mm / 41 inches Recommended clearances: (for ...

...Select [Change Settings]. Use th numeric keypad to enter a value for the Border Limit between 1 mm -127 mm (0.039 to 4.9 inches). The default is 16 mm (0.62 inches). Select [Save]. Select [Close] ...

...inch (216 mm x 279 mm) or A4 (210 mm x 297 mm / 8.3 x 11.7 inch) paper in Tray 5 (Bypass Tray). Adjust the paper tray edge guide so that the guide gently touches the edge of the paper stack. Select ...

...inch (216 mm x 279 mm) or A4 (210 mm x 297 mm / 8.3 x 11.7 inch) paper in Tray 5 (Bypass Tray). Adjust the paper tray edge guide so that the guide gently touches the edge of the paper stack. Select ...

...Inch DL110 mm x 220 mm4 x 8.6 Inch Enter the short edge and long edge values for the envelope size you are using. The driver will now show the new custom size as one of the choices in Output Size. ...