Questions & Answers for: Shure mixer distortion

DISTORTION I AM USING A SHURE FINE 58 RUNNING INTO A YAHAMA MD4 WITH A 3/8 RONNING FROM THE AUXILARY SEND TO THE PC AND SONAR CAKEWALK SOFTWARE. I AM GETTING DISTORTED VOCALS AND THE NOISE IS LOUD ...

...Phantom power on Had Mic on standby when all of a sudden it poped and started sending static to the mixer (alesis multimix fire wire). ive swapped cords and the only thing that aleavited the static ...

believe these are sealed pots, so you might need to replace them. It's probably easiest to send the mixer to Shure to have them replace the pots

micro shure ams26 I have 2 micro shure ams26 . I d'nt have the mixer Shure for using with these micro ams26 . For using with another mixer no Shure , what i do ? . Please . Unfortunately there is ...

Can a shure AMS microphone be modified for a stock mixer Can a shure AMS microphone be modified to be used as a normal microphone with a stock mixer. Can the rear facing mic be disabled. This mic is ...

...this is the case, turn down the gain on the handheld transmitter. If the meter on the receiver is not going into the red, then the distortion is occurring after the microphone, probably in the

mixer is introducing crackling sound intermittently to the process Isolate one channel at a time to see if a particular channel is the problem. Make sure ALL interconnected equipment is powered from ...

...into my starsinger on the tele but sounds is very low compared to the crappy mics? i plugged up a mixer box and can get more sound now but should it work fine. does it need a mixer? with the ...

what causes noise on Powered mixer There is nuicance when un used wireless microphone is switched off when connected to power mixer what could be the cause , Have Yamaha Mixer 312 and sekaku wireless ...

I hear a white noise when I connect microphone with mixer (Behringer DX2000) Only hear a loud white noise, sometimes very soft my voice. You posted this in questions about the Shure PG42 mic. That mic