mix 2 left deck crackles upon start-up and then crackling dies down after about an hour or so of use,. Right deck now and then skips the last minuet {approx} of track but problem dose not persist when
...i have got a problem with one of the turntables something to do with the pitch as i would be mixing 2 vinyl that i had mixed before perfectly and this time 1 was goin faster than the other so
...i have got a problem with one of the turntables something to do with the pitch as i would be mixing 2 vinyl that i had mixed before perfectly and this time 1 was goin faster than the other so
instruction manual for ministry of sound mixing decks hi Do you know where I can get an instruction booklet for ministry of sound mixing decks. i have tried everywhere but cant find one and we bought ...
...mix, the deck which you enable will start to play the tune. Hit the mode button, then select control, and turn on Fader start. It's actually really cool and allows you to do some ballsy mixes :) The ...
Question about Numark Cd-Mix-2 Dual CD Player/Mixer Combo - Good CD Player
deck 2 on numark cd mix 1 player. The slightest vibration even at very low volumes causes deck 2 to skip, cut out etc. Had to hold it all night friday night whilst doing a disco just so I could use it
Question about Numark CD-Mix-2 Dual CD Player/Mixer Combo System
...Deck My Numark CD MIX 2 is making a ticking sound in the right CD Deck when I insert a CD and won't play the disc. The LEFT CD DECK is operating but the RIGHT CD DECK IS NOT, can I fix the issue ...
Connecting laptop to mixing deck!! Does anyone know of a good means to connect a laptop to a mixing deck to play music at a party. The only way iknow is by using the earphone socket, the only trouble ...
...mix the left deck is playing through my headphones but isn't registering on my mixer, When you turn the deck off and on again it then registers on the cue meter on the deck. Any help would be ...
...is hooked up using RCA jacks and cables? Do you know if the deck's amp is putting out? Have you mixed up the channel wiring? Maybe confused the "input" and "output"? I did that once---output from ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions
