Questions & Answers for: mix Baking

Question about 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

2 Answers

connecting a BISSELL AUTO MIX PISTON TO A AUTO MIX KNOB HOW DOES ONE CONNECT A BISSELL **7901 SERIES**PROHEAT AUTO MIX PISTON TO A BISSELL AUTO MIX KNOB??? Take of the housing ,turn it over and you ...

Ad

Question about 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

2 Answers

what is the fuel oil mixture for a homelite gas trimmer model ut20779 Hi a safe fuel mix is 25:1 but most homelites run a mix of 32:1 either one should be ok FUELING AND REFUELING THE TRIMMER FUEL ...

Ad

Question about 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

1 Answer

need to now how much oil and gas to mix Most newer 2 cycle motors use a 50to1 mix. Older models use 40 to one. If you don't know the exact mix a 40 to one ratio will work for both types. The really ...

...to add coolant to reservoir. Do i add straight coolant or does it need to be a 50/50 water/coolant mix? It is best to add a coolant mix. You can get it ready mixed, but try to ascertain if your car ...

what is the correct amount of coolant after installation of new radiator ready mix ok? anti-freeze no mix? Ready mix is ok, but usually more expensive than buying the regular and mixing it 50/50 with ...

Question about 1994 Grand Am

1 Answer

soft serve machine freezing solid POSSIBLE CAUSES• Mix hopper is empty, freezing cylinder starved for mix.• Mix in hopper contains ice particles, mix feed tube clogged.• Machine turned too cold ACTION

Question about 1994 Grand Am

1 Answer

jonsered user manual what is the oil to petrol mix ? Most machine run 24:1 but go to jonsered main web site or local dealer. Mix amount in a separate can / bottle before filling machine. Buy a purpose

Question about 1994 Grand Am

1 Answer

how to mix the oil for GTI 19? Owners manual call for 40:1 mix for the Weedeater GTI19. Or just use a good multi-mix oil that works from 16:1 to 50:1. It come in pre-measured bottles or packages for ...

Question about 1994 Grand Am

1 Answer

...the tank/container. If applied with other products, add LIQUI-COP last. Agitate the tank during mixing and application until tank is empty. A plastic or metal stirring stick should provide ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...