Questions & Answers for: mitsubishi wd 60735 wont

wd-60735 tv if i hook up a convertor box to it i get air channles if i just hook up the antenna to it it wont find any channells what could be the problem? Thanks As of 6/12/09, the over-air broadcast

I cleaned out my filter and now the status light is flashing yellow and the TV wont turn on. What should I do? check the door there is a small switch on that door try to take off and put it back

ihave 2 mits.ws-65869 proj. tvs. 1 shows red and blue on all objects and wont converge manualy as the grid is wavy also. the other works for few hours then developes waves up and down that get worse ...

mitsubishi wd-60735 have to cut tv off let cool down cut back on to get rid of double image There are two common problems with these sets. Problem #1) Convergence Symptoms: Screen Looks 3D Colors wont

The red status light is blinking and my t.v wont turn on the reset button didnt work and I dont know what to do I chANGEed the bulb on my tv it use to blink red now blink yellow and wont turn on

i just replaced the bulb and housing for my mitsubishi wd-60735. Instead of a red flashing lamp light i get a yellow one now and the tv wont turn on. IT NEED A red flashing lampTO WORK

...mitsubishi (WD-60735) now has yellow light and wont turn on it was not the filter cleaned it need help!!!!!!! Recheck the the tv safety switch it is not on or a little warp before u put it back and ...

my 60735 wont find my hp laptop in an hdmi to hdmi Use rgb/vga connection.

mitsubishi wd-60735 replaced lamp. tv still wont come on. orange flashing light This set should have a self check:

Mitsubishi WD-60735 lamp stays on after I turn unit off until overheat. When I turn unit off, lamp stays on until over heat. Lamp indicator flashes green. When indicator stops flashing, lamp stay off ...