...MITSUBISHI GALANT WONT START AFTER TIMING BELT CHANGE how to change crankshaft position sensor check the crankshaft position sensor on the bottom of the crank. There is a disc with wings behind the ...
...Galant. Overheating. Heater works when it wants to, sometimes blowing hot, sometimes cold. Changed thermostat. My antifreeze is full. Is it my water pump? How do I go about diagnosing the problem? ...
my 2001 galant is overheating. the radiator fan doesn't work unless i turn the a/c on. what could be wrong with the fans Sounds like a fan relay is defective.
Mitsubishi galant 2001 was over heating , change the fan could not start, change the control box,ECU dISTRIBUTOR CRANK SENSOR, STILL DIAGNOSTIC MACHINCE READ IMMOBILIZER MALFUNCTION Hi David,Firstly, ...
...mitsubishi galant 2001 Replaced radiator and thermostat because heater was working and radiator was cracked (just replaced last week) since replacement, white 'smoke' or steam is ...
...Mitsubishi Galant have and overheating failsafe Timeing belt shreded car died is there a chance the valve are not bent? Sorry to say the 4 cyl is an interference engine and I think the V6 is too. So ...
Question about 2001 Galant
Mitsubishi Galant ES V6 has an overheating problem, replaced Thermostat, checked for cracked Head gasket and it's not either of those things, what else can I do, if I change out the water pump an d it
Question about 2001 Galant
why would the upper and lower raidiator hose be rock hard even after taking out t stat and overheating Blown head gasket letting compression into the cooling system.
Question about 2001 Galant
upper and lower radiator hoses hard as a rock even after taking out t stat also overheating I put a new t stat same problem took t stat out same problem both rad hose still very stiff and car still ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions