Questions & Answers for: Ford Ranger miss firing

...miss firing problem with my 1998 4.0 Ranger. Is there some problem that may be causing this? OBD II code reads P0304 number four spark plug miss firing. I will just clean or remove and replace the ...

...System Firing Order 1-4-2-5-3-6 4.0L Engines Firing Order: 1-4-2-5-3-6 DIS Ignition System 99 Ford ranger 3.0 liter , change plugs,wires,coil pack and still have a #6 miss fire what else can it ...

2004 Ford Ranger XLT miss fires in blowing snow I drive down the road on a cold day with the wind blowing and when i come to a spot where snow is blowing across the road it will miss fire. This only ...

miss fire i have a truck 1996 ford ranger xlt two wheel drive engine 3.0 has miss fire cilinter #4 i chage sparks plugs and wires also but check engine light is till coming out said it miss fire ...

ford ranger codes 305 306 what are they p0305 miss fire cyl 5 p0306 miss fire cyk 6

...the firing order is off it runs but has a miss and pops when you give it gas what is the firing order it has 2 coilpacks what do you think is the problem i would check the mass air flow sensor ...

Truck won't run Truck was missing,changed plugs,distributor&rotor. Still not running properly,days later lost power& won't run but is firing By "...but is firing."  I assume ...

2002 ford ranger missing out when ac is running Could be a long list of choices.Nothing special happens when the ac is on other than the extra load on the engine.You probably have a slight miss-fire ...

# cylinder 3 misfire #3cyl miss fire plug and wire check to be good changed coil pack stii miss fires. what could the problem be ? you don`t say how you verified that the plug and wire was good. I ...

Hi, I have 2003 ford ranger 3.0 engine and I missed up the spark plug connection order once I tuned it and replaced them wires . Can someone explains the correct way? search google for your firing ...