Questions & Answers for: Ford Explorer miss firing

engine has intermittent miss 1998 4.0 sohc had a miss a couple of months ago. replaces plugs and wire with new, miss was corrected. about a week ago engine started to miss when started but would ...

I HAVE A MISS CLY #1 new plug wire or plug or distributor rotor. check wire to make sure its gettin fire. take a straight screwdriver and put in the wire and have your metal part of the screwdriver is

...the plug, but cylender is not firing causing a dead miss...what could be the problem (none of the other 5 seem to have an issue) thanks, larryb If the spark plug wires are good, replace the coil

firing order on a 97 ford exporer. its got a miss and am wanting to see if it is right. also wondering if i could get a diagram sent. 4.0L OHV Firing Order Firing order for the 4.0 liter OHV V6 is 1-4

...but we chanced the plugs n wires n now it is miss firering Retrace the plug wire`s you have the firing Order off Take your Time Recheck Firing Order And Plug Wirer Positions to Cylinder to firing ...

...will not start. Brand New battery. I performed a Tune up to try and eliminate the 3rd cylinder miss fire, but a week after tune up was performed the Vehicle will not start. check for fire, fuel, ...

02 ranger 3.0 rough idle miss fire2 &6 cly. rough idle miss fire, mass air, or coil pack coil pack

my 2004 ford explorer was running fine it started missing lights went off and now willnot start or turnover we have installed new battery aultnator and tried jumping around starter it will turn over ...

Why doesn't it start? no fire at the fuel pump 12v is not at the shout switch Are you missing anything else? Engine cranking do you have spark at the spark plugs? Do you have a fuel injector pulse? If

filter and replaced the spark plugs. Now I have a rattle on the front right bank. It lost power and misses. One of those plugs isn't right, or you mixed the firing order. V6 and V8 in the link https:/