Questions & Answers for: Buick Park Avenue miss firing

Hi-Speed Miss under load on Park Avenues - Both Ultra and Non-supercharged Both cars have under 40K miles - 'just changed the fuel, air and oil filters on the non-supercharged car as a precaution. ...

Ad

Sudden missing on cylinders 1 and 4; no fire at coil; Ireplaced the coil; stillno fire on 1 and 4 new coil and no fire? test the ohm rating of the all coils old and new. It maybe the ignition module ...

Ad

#1 cylinder is miss firing and i have already replaced the plugs wires and coil what else could it be? Bad injector or a valve problem

Question about 1991 Park Avenue

1 Answer

...park avenue I started it up one day it ran fine and drove fine. The next day It's back firing and missing I drive it down the road and the trans. would not change. can you help me. Hello. If you ...

Question about 1995 Park Avenue

2 Answers

engine runs rough , low pulling power, misses on even slight grades up, all cylinders indicate firing, New crank position sensor and harmonic balancer, 270000 miles, Not enough info but with that many

Question about 1998 Park Avenue

1 Answer

my 1998 Buick Park Avenue is miss fireing for some reason i chaged plugs,crank sencer,idle control and most other sencers on this car plz help im stuck!!! change plug wires have injectors tested fuel ...

when acelarating hard it will miss and back fire in the intake Worn timing chain Distributor Issue Vacuum leaks

Question about 1993 Park Avenue

1 Answer

...owner told me it ran fine. I had autozone run it on there machine. 3 code's came up; a cylinder miss fire, the cam. sen. & the ing. cont. module. The car cut off on me 3 time's. The first

Question about 1999 Park Avenue

1 Answer

random miss fire on 1999 buick park ave I HAVE A 1999 BUICK PARK AVE WITH A 3.8 SUPER CHARGED ENGINE. IT CURRENTLY HAS A BANK 1 LEAN PROBLEM AND MULTIPLE MISS FIRES CODE. I'M SURE THE BANK 1 LEAN ...

2003 buick park avenue misses badly on acceleration or hill climbing. ZSpark plugs show burn lines on ceramic part replace and it reoccurrs Did you also replace the spark plug wires? The burn lines on

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...