miss fire cyc 8 changed plug and coil pack scan tool still says miss fire number 8 check compression, then fuel injector. or vac leak. what kind of scan tool. very few will give live misfire data. you
Hi missing when started up rev it up & the miss fireing goes If you are saying that when you first start up the car it misses and then if you rev up the engine the miss goes away, I would say that
service engine soon code 3rd. cyclinder miss Service engine soon code (3rd. cyclinder miss fire).What should I do? Sears auto service center put in new battery & alternator they said it should ...
firing order for 1999 lincoln town car miss firing Hope this helps
...miss-firing. What to do next??? Coils?? If so how hard are they to replace? Thanks Sometimes you can use digital multimeter to check for ignition mis-fire. With engine idling, touch spark plug wires, ...
...miss firing, I think i GOT some bad gas. I used fuel injection cleaner,, miss firing is slightly better. You will likely need new spark plugs and ignition wires or coils, depending which system is in ...
...cat engine light came back on telling me cat defetive went to auto zone gave me 3 things air leak miss fire or running condition or oil getting in exaust I dont have a miss fire and im not burning ...
no fire all the time It fire's some time's and run's you can drive all over then shut it off the next day it wont have fire it may take 3 or 4 day's be for it will start and have fire Fire--means what
miss was in the 8th cylinder check and separate all the HT leads as it may be cross firing through the wire insulation from touching each other. There are spacers available from a spares shop for this
...firing order? ALSO NEED THE LOCATION OF BANK 2 SENSOR 1. MY 2001 CONTINENTAL IS SHOWING MISS FIRE ON CYLINDER 4 ALONG WITH THE BANK 2 SENSOR 1 BEING LEN BUT DONOT KNOW WHERE IT IS LOCATED Found this ...
Usually answered in minutes!
1,383 Questions
1,094 Questions
900 Questions
898 Questions
893 Questions