Questions & Answers for: Mercury Sable misfire code

numver 3 cylinder misfire 2001 sable rough idle at start-up. service code set for number 3 cylinder misfire Yep, bad plug or wire.

code, #2 cyl misfire. Changed the plugs and wires. Cleared the codes and still a problem. Now I changed the injector and still have the same problem. At 25-35 mph if you rapidly accelerate it stutters

...code po 304 and po316 P0304 is Cylinder 4-misfire detected-probable cause is as follows. Engine mechanical fault, wiring, ignition/fuel system, injector, ECT/MAF sensor, ECM P0316 Misfire detected ...

...code for free some other shops may as well. Right, get the engine codes from autozone, it may show a misfire on a certain cylinder. Change wires, just the one that misfires to be sure it's not the ...

...CODE PO316 MISFIRE DETECTED DURING START UP FIRST 1000 REVOLUTION.CHANGE FUEL FILTER AND CLEAN FUEL INJECTORS SEE WHAT HAPPENS MISFIRE COULD BE LEAN FUEL MIXTURE DUE TO STOPPED UP FUEL FILTER ...

...2007)DTC P0171 "System Too Lean Bank 1"DTC P0174 "System Too Lean Bank 2"DTC P0301 "Cylinder 1 Misfire Detected"DTC P0305 "Cylinder 5 Misfire Detected"DTC P0316 "Engine Misfire Detected on ...

misfire code that is identifying number 3 cylinder as the cylinder with the misfire problem. MANY things can cause a cylinder to misfire including spark plugs, spark plug wires or boots, burnt valves,

Cold engine Misfire Engine misfires only on cold start-ups. The PCM sets trouble codes P0305 and P0316. After the engine warms up the misfire disappears and the engine runs great. The trouble codes ...

code replaced plugs and helped for awhile change plug wire no change . sometimes runs fine idles ok till i hit brake vacum at 20+. timing seems to be alittle high at times 45 at higher rev light load,

...misfire Misfiring cylinder 3 Trouble code p0320 1) Google the code with the car model; read the troubleshooting tips 2) replace the spark plug on 3 cylinder if worn out; 3) need to check the el wire ...