...Misfire code I have a 2004 Chevy 2500hd. I need to replace the evap purge solenoid valve, but I also have a "Random Multiple Misfire" code. There have been no noticable issues with misfireing. Could ...
Misfire third sparkplug For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting procedure :---- OBD-II Trouble Code P0300? ...
...------------ Engine Misfire codes for car? ...
My 1996 tahoe is giving me cylinder 2 misfire And runs ruff idle For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting ...
...code #6 cyl misfire replaced coil pack then threw a po300 multi cyl misfire any suggestions The code you got may not have indicated the correct coil, that was badI would put the old coil back in #6 ...
...misfire and a mass air flow code ... replaced bank 2 upstream sensor and ran on lift, bank 1 upstream sensor flagged. replaced that sensor also and car still misfires badly. removed plugs found all 4 ...
Question about 1999 Lumina
...misfire code. A vacuum leak is a possibility as well as a bad MAF sensor or even poor fuel pressure. The p0341 code is a code for the cam sensor. Typically this will not cause any issues other than ...
...misfire code for cylinder # 3, Possible spark plug, wire/coil or injector problem. P0141, bank1 sensor2, is the upstream oxygen sensor, this code may have been set by the misfire of Cyl #3, the lean ...
...code misfire cyl 2 and 3 If it was just cylinder 2 or 3, the code would be 0302 or 0303. Instead, you have random misfires (probably) such that you should be checking things that affect the whole ...
...followed the coil- if a misfire code sets on the cylinder you moved the cylinder #5 coil to, you know the coil has a problem. That will at least help you rule out the remainder of the ignition
Usually answered in minutes!
4,236 Questions
3,219 Questions
2,541 Questions
2,307 Questions
2,177 Questions
