Questions & Answers for: Pontiac Sunfire mini clip

Question about 1999 Sunfire

2 Answers

...mini flat head srewdriver. Push the door surface and turn the crank until you can see the ends of the clip. Now, use your screwdriver to push the clip off the crank handle. It will shoot off so keep ...

Ad

Question about 1998 Sunfire

1 Answer

lock I need to remove the trunk lock on my 98 sunfirs to have it rekeyed open trunk look on inside of trunk lid where lock is .you will see a clip ,just slide off clip remove lock

Ad

how do i remove the interior window handle in a 1996 pontiac sunfire? (two door coupe) the handle seems to be pressure fit on the as there are no visible snap or c rings. Press the panel in close to ...

How do you remove window crank to remove door panel- do not see a clip pull handle from door, creating small gap, with needle nose pliers remove clip, is like 3/4 circle that locks handle to door. ...

how to hook up a remote starter to a pontiac sunfire 2.4l , i want to check for spark ,but i dont have any body to do it by the key They sell a push button at your local auto parts store (about $15) ...

I think the person who had my car before me broke a key in the key hole of the door. How do i pop out the key or if i cant how much does it cost to buy a new one and is it easy to install? the ...

how do i remove the interrior door panel on a pontiac sunfire i dont see any pin on the window handel and wuz wondering how to take it off if its a standard clip type window crank what you do is get a

Question about 2001 Sunfire

2 Answers

i am trying to remove front door panels on a 2001 pontiac sunfire. i can nort remove window crank to pull panel off Try pushing panel in to see if there is a clip holding crank on . If so that clip ...

Question about 2005 Sunfire

1 Answer

alright i have a pontiac 2005 sunfire, and i SWEAR their is no clip holding the window handle in place, i dont want to pry to hard just in case i break it, other suggestions said their a skrew ...

Question about 2003 Sunfire

1 Answer

how is the actuator rod connected? usually has a plastic/nylon swing clip that goes over the rod and clips into place holding the end of the actuator rod into the lock, these are easily broken, get ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...