Questions & Answers for: mighty mits

Question about 1991 Mighty Max

1 Answer

...mits, i think it has gone out or something, it will not start and i either need a distrubtor cap or the computer. I recently replaced the ECU in my 91 mighty max. If you remove the glove box you will ...

Ad

Question about 1989 Mighty Max Macrocab

1 Answer

window crank slipping and hard to crank up First, I love my '89 mit p/u with 189+ miles. the hand crank on my driver's window is starting to slip and hard to crank up. down is no problem. i'm somewhat

Ad

Question about 1989 Mighty Max Macrocab

1 Answer

...mits mighty max and in the mornings it doesnt want to stay running, but when i unplug the air filter it stays running but the engine lights comes on. Well you have a lack of air being sucked into ...

...mits mighty max, how do u read ob1 codes? my harness wont read Don't waste YOUR time. Let the experts do it for free. PepBoys will read it for 88 Dollars. Autozone will do it for free. Get moving!! ...

...one and replaced the ignition switch also. 1986 Mits. Mighty Max and well maintained. The starter is at fault,the contacts are bad in the starter,and it is drawing to much amps from the

Question about 1986 Mighty Max

1 Answer

My 1989 mit. mighty max will not start. It is not the battery. With a friend, crank it over and check for spark. If spark, ok. Crank over for 5 seconds or so then remove a plug or two and check for ...

88 mit might max 2.0 no fire new coil. ceramic piece between te battery and the coil is fractured some fire but not enough to start. can you send me a diagram on what the timing should be. I have ...

Question about 1992 Mighty Max

1 Answer

...Mits Mighty Max failed smog on Ignition Timing. The mechanic wrote "timing with brown connector grounded". What is this? Is this something that I can fix? If so how? The previous (first ...

...mighty max when operating vehicle, i can use a test light at the solenoid i get power at the lead wire and power at second wire. here is the funny part when i touch the second wire with probe the egr ...

...roughly it's not a big job, I would estimate maybe $100. Could be done in 2 hours I figure. I have owned a Mits Mighty max 2.0 for 30 years and that's my best guess. Don't have a shop jerk you

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...