Questions & Answers for: microwave clock keeps resetting

...microwave, it works for about 3 seconds, then it shuts off and keeps saying to reset the clock. When the clock is reset, I start over again and it does the same thing. Can anyone help? sorry to say ...

microwave from oven/micro/warming drawer not keeping time correctly. clock is shaking and running 3-4 hours behind. The first thing I would suggest is a hard reset. Unplug the unit for a minute or so.

...behind after awhile. after setting the time, press start rather than clock again i have the same problem i cant set the clock on my microwave wst 3501 it keeps going back to the original time ...

...microwave clock turns off and starts to beep. Have to unplug. when plugged back in, program clock. Couple minutes later clock goes out and starts to beep. Microwave still works. No problem with heat, ...

...microwave keeps kicking off the power and asking me to reset the clock frequently. I have done a hard reset by pulling the plug and waiting 5 to 10 minutes. It will start up again and then after a ...

...clock (not the timer) keeps losing its memory after normal usage and I have to reset it frequently. To reset it, I follow the CLOCK,enter clock time,select AM or PM, CLOCK sequence. Our oven clock ...

...Try disconnecting power for 5min.then plug back in,The microprossor may have locked up this happens a lot with uprocessor controlled equipment. salton microwave keeps showing clock and will not ...

...microwave JMV8186AA . The clock display keeps resetting to ":0". No power disruption, will keep time for several hours then reset. We like the auto nightlight and would like to fix this. Any ideas? ...

...The microwave might have a small battery that keeps the clock running (if it has a clock). This battery might be run down and needs to be replaced, so it sends out a warning beep. Just a

...microwave's internal clock settings. Try resetting the clock according to the instructions in the user manual.Weak Power Connection: Ensure that the microwave is plugged into a stable power outlet. ...