...MICROWAVE CAVITY. DUE TO POPCORN BAG INFLATING AND PUSHING THE RACK AGAINST THE SIDE OF THE UNIT, I HAVE TWO VERY SMALL SPOTS(SIZE OF PENCIL LEAD) IN THE CAVITY. IS IT SAFE TO CONTINUE USE AND CAN I ...
Question about R-820B Convection/Microwave Oven
cavity of my 6 year old microwave oven is peeling from the top. I don't know why. Is it safe to sand off the loose paint and touch it up? Sand off the loose paint and make sure that there are no holes
Question about MW8102SS 1100 Watts Microwave Oven
microwave oven is peeling The oven cavity will probably start to rust where the paint is gone. If you're up to it, sand it and paint it with a color that matches the interior color. Other then colors,
microwave cavity. I have sanded down areas to expose metal. What type of paint do I use to touch-up cavity areas? Apply some high-temperature appliance paint, available from places like Wal-Mart, Lowe
...microwave cavity support. It is also recommended to replace the rack supports in this situation to ensure the issue is resolved. Cavity paintIf sparking or arcing in the microwave is visible on the ...
microwave If the wall of the cavity is not rusted too badly, you can sand it down to metal and touch it up with catalytic paint made specifically for microwave oven cavities. You should be able to get
...microwave cavity support. It is also recommended to replace the rack supports in this situation to ensure the issue is resolved. Cavity paintIf sparking or arcing in the microwave is visible on the ...
Question about JE1460 Microwave Oven
...and e-mail to GE and see if they recommend anything that is microwave safe. Fred, I have used the following paint with no problems on several microwaves where I work. MICROWAVE CAVITY PAINT ...
Question about JE1460 Microwave Oven
...cavity was wet sanded, cleaned with acetone and painted with QB microwave oven paint and all looks good so far. The paint and roller ring were purchased from Amazon, the sandpaper and acetone from ...
Question about JE1460 Microwave Oven
microwave cavity paint."
You can read directions for how to go about the project:
Read the instructions through, completely, before starting on your project so you know what supplies
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions