Mic input. The CD (Music) sound come on the speakers but the Mic input does not. We tried inputs as Line+Mic, Digital etc but all of those failed. Mic is working since we tested that with another unit
Question about XL-R5000BK CD Player
...input of a Mic priamp to connect to Mics to one pre is a bad idea. There are lots of techy reasons why, but the short version is "Don't Do it" So how to solve your problem.. If you have a spare Line ...
...it is set to mic (Input 1) Hope this helps. [email protected] Also put the phamton switch in off . and put a dynamic mic. the setting in menu is better put in -50db and adjust the level control
...mic and the input. It steps up the voltage of the mic, giving it a stronger signal. To tell what impedence (Z) you mic is use the following to match the rated ohms on your mic with the impedence: ...
mic input. You also have the option of plugging the guitar directly into the DP02 (using the hi-z input - I believe it is labelled 'guitar' or something on the DP02. I any event I believe it's the one
Question about C01U - USB Studio Condenser Microphone Consumer Microphone
the program to detect my mic as the input to do voice recordings? A condenser mic. requires "phantom power" usually supplied by a mixing desk. Without this, there will be no output signal from the mic
Question about C01U - USB Studio Condenser Microphone Consumer Microphone
mic. The input on the mixer can me used for mic or line input. It has a XLR and a jack input. It seems the input is auto sensing as there is no switch on the mixer. Is the mic input broken of is it me
Question about C01U - USB Studio Condenser Microphone Consumer Microphone
...of a mic input, there should be a input, labeled Mic or Microphone. Once you located the input, you will just need to plug the mic into the receiver. Hope this can be of help. Kind regards ...
Question about EURORACK UB2442FX PRO Mixer
behringer Eurorack UB2442FX - PRO mic inputs are intermittent I bought a Behringer Eurorack UB2442FX, and it is very clean, but some of the mic inputs stop working without warning. After I unplug and ...
input for it on the front. check specs from your manual. there can be another way but it will cost you. a preamp mic plug into one of you inputs via rca connection Sure ... if you connect the mic to a
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions