Questions & Answers for: mf 25 Televison & Video

Question about Computers & Internet

1 Answer

25/01 RAM SIZE:256K BIOS OEM :SE-810ET/MT/MF VER. 3.2(2003.10.18-2MM CHIPSET : INTEL WHITNEY 82810e REV. 3 PROBLEMIS IT DETECT ONLY 256 sd RAM OUT OF 1GB sd RAM. I WANT TO DETECT ITUPTO 1gb RAM SO ANY

Ad

Question about DTQ-26S1FC 25" TV

1 Answer

...board..They are 160 volts 1 mf and you may have to check the the large Horizontal cap , I think it is 25 volt or 35 volt 1000mf cap. Good Luck PS Look for 250volt 4.7 cap is bad too! DE

Ad

Question about B25A24Z 25" TV

1 Answer

25 volt 220 mf cap. The C3460 is the culprit that is stopping the feed to the audio out put IC. This cap is near the audio IC. It is attached to a large heat sink. Resolder the pins on this IC as well

...25 volt 220 Mf cap that is also dead. It has been a very longtime since I have repaired this one. But the information, will get your TV up and running again! Find an electronic hobbiest or a TV tech ...

...25 volt 100 MF cap and a 35 volt 22 Mf cap. These are located very near the STR 5041 regulator on a large heat sink. Have them replace the high voltage deflection cap that is about 200 volts at 1 Mf, ...

Question about C25A24T TV

1 Answer

...25 volt 220 Mf capacitor, CX3218 at 160 volts at 1 Mf (could be 2.2Mf), C3416 at 25 volts 100 Mf , and CX 3413 at 50 volts 22 Mf. In severe cases you would also replace the powerling ...

Question about B25A02Z TV

1 Answer

bad caps there. The locations and values are, CX3218 (160 volts 2.2Mf), CX3205 (16 volts at 100 Mf) CX3413 (50 volts 22 Mf) and CX3416 (25 volts 100Mf). Thanks for asking and show all hands of support

Question about AD25BBR 25 Pint Per Day Dehumidifier w/ AccuDry Sensing System & EZ-Empty Bucket Humidifier

1 Answer

...mf'd by DNA Group for a Whirlpool Model AD25BBL8--25 pint dehumidifer   Hi, That is not that hard to fix and you can easily buy the parts yourself online... Here is a tip that will help you ...

...25 volt cap (not sure the MF value), C4127 which is a 100 volt at 10 Mf, C4404 which is a 200 volt at 2.2 Mf, and C4105 which is a 200 volt at 10 Mf. replacing these will give you control of your TV. ...

...25 v and 25volt are now 35 volt parts 680 mf replaced for 1000mf 82 mf for 100 mf
Thats all what is neccesary to repair the humax POWER SUPPLY


BUt if that your model is not 24 months ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...