Questions & Answers for: meter fuse

...fuse with ohms meter? Remove the fuse and look closely at the element in the fuse. You can tell by looking if it is burnt into. If you cannot and want to test it with an ohm meter, then set the meter ...

Ad

Question about RS2640 CD Shelf System

1 Answer

...fuse is good you will hear the meter continuously beep,if the fuse is bad you will hear nothing at all,also if the fuse looks burnt then replace the fuse,no need to check it with the meter,good ...

Ad

Question about RS2640 CD Shelf System

1 Answer

...fuse is good if the meter gets a completed circuitthrough other circuit components. To be safe, always remove the fuse from thecircuit before testing it. o 4 Touchthe black test probe to one end of ...

Question about RS2640 CD Shelf System

1 Answer

...fuse is good if the meter gets a completed circuitthrough other circuit components. To be safe, always remove the fuse from thecircuit before testing it. o 4 Touchthe black test probe to one end of ...

Question about 42 in. LCD TV

1 Answer

fuse, if the multi-meter shows a low reading then the fuseis OK. If the multi-meter shows a high reading or no reading the the fuse is open circuit or blown.If the fuse is a glass type and it is burnt

Question about 42 in. LCD TV

1 Answer

...if zero ohms , iTs good, and the meter never lies. learn to use the meter. if the fuse is good, use the same meter, to measure voltage and trace the wires to the failing point. (open

...fuse with a meter?if not buy a meter or you'll end up changing parts you don't need,if you changed out the fuse and still have no heat then your old fuse was good and you have another problem,buy a ...

Question about 42 in. LCD TV

1 Answer

meter' fuse blows when in drive. I have a Kia Sportage 2001. The 'meter' fuse blows when it is put into drive. There are no error codes stored and the transmission range switch seems to be ok. It will

Question about Over-the-Range Microwave

1 Answer

...the fuse from the holder, put one lead on each side of fuse. meter indicates 0.00 fuse is good, meter reading does not change fuse is bad. Electonis fuses can only be checke with a meter not

Question about Over-the-Range Microwave

1 Answer

... put the meter on ohms x1 unless its an auto range then you don't have to do anything but set it to ohms and put the meter across both sides of the fuse and the meter should go to 0 if the fuse is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...