Questions & Answers for: metal brake lines across rear

...brake pads to ware unevenly, probability that both rear axles are floating is pretty unlikely. Hope this helps... please rate suggestion...ty where do you live meaning if you live on mountain or ...

...brake pedal its slowly creeps and drops to the floor, the brakes work but i guess at 10% effective. Is the an electric pump to boost the master cylinder pressure up? air in the lines,bleed them,check ...

...rear end, in the center of the gear cluster you'll have to rotate your axle until it exposes the ends of the axle shafts, push in the axles as far as you can from the brake pad assembly area, then, ...

...brake drum.Remove the rear diff cover, with a drain pan to catch the fluid.Remove your rear pinch thru bolt, your pin will then slide thru.Push both axles in to release and remove the u clips on the ...

...brake lines and where the line is at the ABS module If it's a metal line, Your local auto parts store should be able to order it for you or worst case you'll have to make your own from straight ...

...cable is still good...help. Sounds like the brake linings are worn to the metal. I would take the truck to a service center for an estimate. Ask them to inspect the rear brakes and pull the drums

rear axle removal gmc jimmy Have to remove axles to replace backing plates and emergency brakes I would take it to a professional mechanic. Trying to figure out something that has to do with the ...

...is a black hose with a metal rod where air can go thru hmm ? 1999 gmc jimmy Could be brake lines or fuel feed and return. Could also be the rear shock absorber? A picture would help

...brake circuit but not the rear. The only possibilities would be the Master Cylinder or a proportioning valve. Not an expert here, but sounds like the master cylinder is not releasing all lines after ...

The brake pedal on my '99 Jimmy, has always gone low when stopping. Anyway to adjust it? No leaks and new brake lines... if air bled out correctly ---adjust rear brake shoes