Questions & Answers for: mercury transmission codes

...mercury sable Okay this is a internal problem in the transmission you will need to remove side cover and oil pan of the transmission.This is a big job to do it safely you will need a hoist and engine ...

Ad

mercury mountianeer o/d light flashing this OD light flashing means a fault has has been sensed by the transmission control module in the electronic transmission controls, to see what this fault might

Ad

...mercury sable P1744 is a torque convert clutch circuit failure code which appears after the PCM tries to lock up the torque converter and fails on 10 consecutive attempts. You will probably need to ...

...Mercury cougar. We put a code reader on it and the printout has these codes PO708 Transmission Range Sensor Circuit High Input P1702 Transmission Range Sensor Circuit Intermittent P1000 OBD Systems ...

Question about 2001 Sable

1 Answer

mercury sable shows two codes p0705 and p0301 are these codes linked together some how code po705= Transmission range sensor, circuit malfunction (PRNDL input) code po301 = is a miss fire on cylinder

Question about 2001 Sable

2 Answers

...Mercury Sable LS. A Transaxle check engine light just came on. After running the code i found it to be code P1779 which means "Transmission control indicator lamp circuit out of range non-mil". I am ...

...engine codes 39 and 89 on 1988 mercury sable with 3.8 engine do not have list of codes explaining engine codes 39 and 89 Both codes involve the torque converter clutch circuit inside the

...mercury grand Marquis Possible causes - Faulty Transmission Range (TR) sensor - Transmission Range (TR) sensor harness is open or shorted - Transmission Range (TR) sensor circuit poor electrical ...

...mercury sable It means that the Transmission control module has detected a fault in the operation of the transmission or its controls. You now need it scanned to see what fault code or codes was set ...

transmission of a 2007 Mercury Milan are located inside the transmission valve body. The valve body is located on the bottom of the transmission, and to access it, the transmission pan must be removed

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...