Questions & Answers for: menu turn on

Question about HDLCD-2600 26 in. LCD Television

1 Answer

...turned on, turn them off. If subtitles are turned off, turn them on and exit the menu, then go back into the menu and turn them off again. I've seen this reset this same problem on some DVD

Ad

Question about TL1700 17 in. LCD Television

2 Answers

...turn to ON 6. push the actual reset button on the back of the tv. 7. turn back on. 8. menu will be up and there will be static. 9. exit menu and turn or plug in your cable box. Worked perfect for

Ad

Question about TL1700 17 in. LCD Television

1 Answer

...Go to menu, audio, highlight on balance and press 0532. However, the turns the tech menu on(meaning that everytime you hit menu you'll get the tech menu)... I don't know how to turn it off

Question about 50H81 50" Rear Projection Television

1 Answer

menu gray area turns black can not exit from menu menu gray area turns black that area of the screen stays black cannot exit from menu cant watch tv with that much of the screen black toshiba 50h81 ...

Question about SP-510 UZ Digital Camera

2 Answers

...turn the sound on and off in the setup menu. Go into the menu and make sure your sound is turned on. If it is go in to the playback menu and make sure the sound is turned up. Let me know how it

Question about IntelliFax-2820 Laser Fax

1 Answer

...TURN IT BACK ON Press 'Menu/Set' then press 1,4,1 and you turn the ring off or adjust the volume. Press Menu/Set then press Stop/Exit. Press 'Menu/Set' then press 1,4,2 to adjust the beeper volume. ...

...a special menu only when the box is turned off. Just turn off the Comcast box and press the menu button on the remote you will then see a menu for the box where you can turn on and off close ...

...Menu Scrolls Uncontrollably ... To turn off the TV, I have to . Vizio LCD 37 Inch Turns Off Randomly - Fixya www.fixya.com/support/t354860-vizio_lcd_37_inch_turns_off_randomly Flat Panel Televisions ...

...turn on. Press "MENU" button to open the OSD menu, at the bottom of menu, you can see a new selection to go into the factory service mode. Inside the factory service mode, you can see useful ...

Menu button, turn on the radio by pressing the Power/Menu button. Keep holding the Menu button until the display shows the Reset prompt. 4. Use the Channel Up or Channel Down button to navigate to the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...