Questions & Answers for: melted transparency

transparency will be somewhere in the fuser unit (the hot bit) i'm afraid you will need an engineer to remove it as it will have melted onto the rollers please use copiable transparencies it will save

printer how to print on transparencies with a dell 3010cn Firstly, BE SURE TO USE LASER PRINTER TRANSPARANCIES. The cheaper inkjet kind will melt in the fuser. Then, in all 3: driver, software program

...transparency probably melted to the the fuser roller (Did you use a transparencies sheet that was rated for use in copier?) Some copiers have a set function to allow transparencies sheets to run ...

...melted in the fusing unit. A good tech can remove the fusing unit and the transparency material WITHOUT charging you for a new fusing unit. Then there is a service mode reset procedure for the code. ...

I have a lasser printer CANON LBP-5200 can I to print on photografic paper?, how many gr.? Are you saying photographic paper or do you mean photoprint paper? Yes, laser printer print just fine on ...

can you print transparencies on a officejet j4580 all in one printer? Yes, provided the transparencies you are using is heat resistance for laser printers. If not heat resistance the film will melt ...

...to clean your printer drum and all roller inside, when its melted your transparency paper it means that it sticks all the way so you have to clean throughly and then refix back then ...

HOW CAN I REMOVE THE TRANSPARENCY MELT INSIDE A SAMSUNG COPIER? HOW CAN I REMOVE THE TRANSPARENCY MELT INSIDE A SAMSUNG COPIER MODEL SCX 8426FN? Hello,Now you have to open that panel step by step and ...

Can I print onto acetate paper (clear sheets) with a brother 7440n printer? Presumably you want to make transparencies. There are Transparencies available specifically for Laser printers and Copiers. ...

...melted a transparency in the fuser by using a ink jet printer type transparency on this model copier cost the school 2000 dollars. Anyway hope you did not melt a transparency any way check the fuser ...