Question about NN-P794SF Microwave Oven
microwave comes on, runs, but food not getting hot! What should I do now to get my food hot? they have a large glass fuse situated in the back it will be situated in a plastic fuse cover
...melted the plastic lid on to the food. Now when you put in a microwave dish with lid it blows the lid off. Any ideas. Sounds like it is overheating due to a failure of the turntable or stirrer or the ...
Question about NN-S960WA Microwave Oven
...plastic, but food "cold" but burn tongue on "hotspot". Food can be as cold as taken-out-of-frig.; still "hotspot." Been watching "recalls" for this model#; know of recall? (Had prior Panasonic, not ...
...plastic part holding the leads melted. Should I simply replace the leads, or should I search for the reason for overheating? TVG The reason is either a poor crimped connection, poor contact on the ...
plastic melted above the glass window by where it seals against the body. Are we in danger? Yes if the seal is damaged radiation can and will leak. If not just scape off the plastic and wash with mild
I have a panasonic microwave oven. It shuts off after running for just a few seconds. It does not flip any circuits. The model # is NN T785SF. It thinks its overheating, and the (faulty) thermal ...
Question about NN-H664 Microwave Oven
...plastic clip) Dimensions Interior: 10-5/8"T x 16-1/4"W x 15-1/4"D Cubic Feet interior: ~18.28 cu ft (based on three interior dimensions multiplied together and divided by 144 to get from cubic inches ...
melted/destroyed the rubbery part with notches that turns that glass platter in the micro. It's not safe to disassemble or repair a microwave oven yourself. I would not try to use the damaged 'rotate'
...in. cooked ok but when we pushed button to open the door and get food out button pushes in but does not release the door. busted plastic part in microwave send model # we can find the part you ...
Question about NN-SD277WR - NN-SD277WR Microwave Oven
...melting on inside - only 2.5 years old. Has anyone else had this fault or just please check where the glass meets the plastic on inside door. I've only had mine 4 months and the door seal has
Usually answered in minutes!
79 Questions
95 Questions
80 Questions
69 Questions
56 Questions