Questions & Answers for: KitchenAid melted plastic food Dishwashers

...melted water tasted like plastic. Changed the filter (even tho it was new) and now that first glass of the day, I fill it half way and dump it out (because the water has been sitting in the plastic ...

mixer will not start Our KitchenAid mixer (model ksm5) will no longer start I can not see how to lift top to see motor. My guess the motor is burned out and needs to be replaced. Thank you for your ...

...plastic dome where the light is. If the defost thermostat or defrost timer is not cycling the defroster heater element on and off correctly... an ice dam forms clogging the drain tube which freezes ...

plastic parts. If you don't want to use a hair dryer, you can soak the supply tubing with hot water, using a turkey baster and catching the overflow in the empty icemaker bin. In some cases, it may be

I have a KitchenAid 600 professional stand mixer. I was told that you can only use the dough hook with setting 2 for only 5 minutes. What do you do for recipes requiring a longer time for kneading? Is

Hi there, I was doing cake mixing and turn off Hi there, I was doing cake mixing and turn off the mixer to put an egg in then I forgot to lock the head and directly put on the speed after around 5s, I

food in the freezer section enough so that the 2 screws holding the lower freezer panel on and the freezer panel , can be removed . Remove the panel . If the heater (black element at the bottom of the

food in the freezer section enough so that the 2 screws holding the lower freezer panel on and the freezer panel , can be removed . Remove the panel . If the heater (black element at the bottom of the

...melted The plastic cover over the vent situated inside the over compartment has melted through/burnt. Why would that be? The temperature reached a high enough value to make the plastic melt .The ...

...food processor? Motor hums but center shaft is stuck and won't turn. The motor hums but the center shaft is stuck (can't be turned by hand). Took off the base but don't know what to do to get the ...