Questions & Answers for: GE melted plastic food

...food in boxes, plastic bags and containers are blocking the air flow during the defrost cycle, for some reason a fan to aid in moving the heated air is not part of the design in almost all cases ...

...food from the freezer, unplug the ref. and hit the back wall of the freezer with a hair dryer. Avoid plastic components as they will melt. When your defrost mechanism fails frost will form where it ...

...melted ice cream, etc.) but returns to frozen after awhile. Has happened many times before. The fan goes on and off. The fridge side seems to be OK (but not sure). Any help would be great. Thanks ...

...plastic smell but doen't heat food up. The smell is almost like a melting plastic smell but not super strong. Is the microwave junk or can it be easily fixed? it sounds to me like the magnetron is ...

...plastic wire tie or something to snake through the drain line,slime builds up in the drain or a piece of food or anything could be in there,when you think you melted and cleaned the drain pour hot ...

...plastic on the sides of your machine. You'll need to melt the ice off your coil, once this is melted, the unit will temporarily work, until it starts to freeze back up. Once your in there, you can ...

...plastic or styrofoam on or inside the wall,heat up the area with a hair dryer for a couple of minutes and then move to the coil,after a minute or two go back the the air duct,when you think it's ...

...melted off of the coil or anywhere you see it,now you have to clear the drain,i use a steamer to blast through the stuff in there to clean it but if you don't have a steamer you need something ...

...plastic milk carton very swollen and ready to burst, two pounds of melted butter, extremely soft cheese, overall the refrigerator was a mini oven. I noted the temperatures were 11 for the freezer and ...

...plastic liner will melt quite easily and be very careful as everything is pretty sharp behind there) The easier way is to take off the back panel (you would have to do this anyway) and make sure the ...