Questions & Answers for: Dodge Ram 3500 measurement

duelly rims will they interchange dodge to chevy to ford ? i have a 1999 dodge 1 tonne 3500 4x4 duelly i have a freind whom wrote off a 2004 ford f 350 duelly nice rims can ford rims be bolted onto my

what are measurments from a wall to set a set of headlights on a 3500 series truck The front of the headlight lens needs to be 25 feet from the wall and needs to be sitting level. Hope this helps.

how many ground connections are on a 04' dodge 3500 my check gauges light keeps coming on and its my battery gauge. i had it tested and my altinator was pushing low volts and batteries were fine. i ...

amps fluxuates from 12 amps to 15 amps That may not be unusual, the preferred measurement is a vlot meter, because AMPS cause customers concern, unnecessarily. Volts need to be 13.8 to 14.5. Amps ...

truck quits wile driving, started up after a cool down period but shut down not long after and would not restart Without more info I would suggest that you have blown a head gasket. Typically the ...

replaced the fan clutch, thermostat, radiator cap, pressure tested engine, water pump ok, so why is my 3500 with a 6.7 still overheating Did you check your radiator and make sure that some cooling ...

when the lights on dash are on it says fuse is blown but when i check they are all ok Just in case: If you've checked all the fuses in the main fusebox, you may not have checked all the fuses in ...

Cummins diesel in 2001 Dodge is cutting out and mild surge. code#s are P0500,P0370 P1693 Cummins 24 valve engine in my 2001 Dodge 3500 recently started cutting out mild a first progressively getting ...

Dodge truck battery drains overnight. new battery installed Seen this "mystery drain" many times. Check spark at the battery to see how big the drain is. For this simple test, blow away any (explosive

miss fire #6 cyl 2000 dodge 3500 van 5.9 egine replaced:plugs, points, rotor, cap, wires, injector. compression about 100 hot 100 PSI is way to low, I think you have a burnt valve. Check the cylinder ...