Questions & Answers for: mazda brake problems

...Mazda 3 Hatch brake lights not working I have a 2006 Mazda 3 Hatch and none of the brake lights work. The general lights work when I turn them on, but when I apply the brake, nothing happens. I've ...

Ad

...mazda brake lights will not turn off how do I fix this problem The stop light switch is sticking. If it's a mechanical one that is operated by the movement of the brake pedal the replace the switch. ...

Ad

mazda 2000 dashboard dont light up what is the problem? Check the Instrument/Brake light fuse. If you also don't have brake lights, the problem should be the fuse. If your brake lights work, then it's

Mazda Millenia V6 2.5L is stuck in part. I has intermittent problems going from park to reverse or drive. Although the break is pressed when trying to move into reverse or drive, the shift stays stuck

mazda 626 1991 back brake ligths not working mazda 626 1991 left handdrive have tested bulbs and working ok have tested for power to the bulbs and get no reading all other back lights work fog light ...

...mazda 1995 brake lights doesnt work. the other lights do work. at night the other ligts work except for brakes. i already have changed the brake switch and fuse too. i dotn know what could be the ...

2001 mazda protege dx 5 spd dies, brakes are seized up? 2001 mazda protege dx 5 spd check engine light is on, car dies randomly and the brakes don't work correctly. repeated problem with timing belt ...

...lower light to have a malfunction in the socket. Mazda says replace brake harness. Cheap fix junk yard but same prob can come back. Also does your cruise work? may be related to switch on brake

Question about 1998 Protege

1 Answer

...Mazda B2200 diesel ute. The front wheels smell like they are burning and the rims are very hot. Is this a disc brake problem or bearings? Or would it be something else? seized brakes.If there is ...

Mazda Tribute and I have a low brake pedal problem. The brake pedal sinks about 1-2 inches from the floor. Has anyone had a similar problem and what was the solution? I've replaced the master cylinder

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...