Is the fan control module available separately for a 2005 mazda 3 The garage says I have to buy the whole fan assembly. That works out to 1000 bucks with labour. It seems crazy when it is just the ...
...Mazda 6 AT light = hard clunk putting it into gear I have a 2004 Mazda 6, and lately it makes a hard clunk sound when I put it into gear, but only when the AT dashboard light is on. The light comes ...
mazda mx6 2.5 v6 i had ngk in first slight miss going on and bucking. the second set was bosch. popping crackling idle fine when press on gas thats when it started checked timing dead on ten degrees. ...
...Mazda 6 S with a 3.0 so I wanted to know if the 3.0 is the same engine Ford uses. I have to do some engine work and am a DIYer. Thanks! Your best bet is,Helm.com ,for the factory manuals. But I seem ...
...labor plus gasket. depending on what the oil leak is, if its the front timing cover that is a big labour job and there is no gasket only silicone. the early mazda 6 did have a oil pan gasket ...
...Mazda 6 4cyl 120,000 miles. bucking and stalling I have an 04 Mazda 6 4cyl 120,000 miles. While driving (80 mph) when letting off the gas my car began bucking and engine light came on. When reducing ...
...mazda 6 Details the engine icon light has been on for months with no problems..then I hd to replace my battery and the next day the car started chugging during acceleration. I have a standard ...
mazda 6 bucking when accelerating Details the engine icon light has been on for months with no problems..then I had to replace my battery and the next day the car started chugging during acceleration.
Question about 2006 6
......
mazda 6 when driving it is doing alot of bucking engine cuts out when you turn air,heater ect on and when driving the engine does alot of bucking. once you step on gas it takes off Check for vacuum ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions