Question about Neptune FAV6800AW Top Load Washer
...# mah55oobww WHEN WASHER IS SET TO RUN COLD IT RUNS HOT FOR WASHING .ALSO THE SAME WHEN RINSING the same when it is set for hot it runs cold you've got the hot and cold hoses reversed, switch
Maytag washer I have a Maytag washer, ,model # MAV5758EWW. I have a problem with the automatic temperature control. Here is the problem. If I select cold/cold, I get hot water for wash and rinse. If I
Maytag performa washer hot/cold now reversed Maytag performa washer hot and cold valves are hooked up correctly, but washer is giving hot water on cold setting and cold water on hot setting. Just ...
...washer for cold wash with a cold rinse, no hot or warm should enter the machine. If any hot or warm enters machine on cold / cold, check to see if the hot and cold hoses are hooked up correctly, and ...
...runs when it should be cold and the cold water is turned on turn your water off and remove your hot and cold lines and reverse them sounds like you have your hot and cold water supply lines
Question about Performa PAV2200
maytag performa washer hot/cold cycles reverse, hooked up correct my maytag performa washer hoses are hooked up correctly but when it is set on cold it puts out hot water, when it is set on hot it ...
Question about Performa PAV2200
maytag proforma washer fills with hot water when set on cold my maytag proforma washer speratically fills with hot water and rinses with hot water instead of cold and no the hoses are not mixed. It ...
Question about Performa PAV2200
...Maytag Centennial washer (two years oldish) MVWC6ESWW1 is filling with hot water on the cold setting. It will start to fill then shut off if on the cold setting and completely fill if on the hot ...
Maytag Atlantis Washer - no cold water We have a Maytag Atlantis washer, 8 years old. Recently the cold water periodically stopped working. It either works or doesn't-- there's no ...
Question about Atlantis MAV9501E Top Load Washer
...maytag washer model lat8006aae hot water flows in slow. I reversed water supply lines, no change, replaced water strainers and new water lines, still slow flow. supply lines, inlet water valve Could ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions
