Questions & Answers for: maytag stacked washer lid switch

MAGTAG STACK WASHER what dose 1E mean? washer want spin. The 1E error codes relates to a lid lock failure. You should replace the lid lock switch. Good luck!

washer lid switch What is the best way to get tho the lid/check switch to replace it? removing top of console then front

Maytag stacked washer/dryer Model LS7804 I have an older model Maytag washer/dryer 7804 and just recently have experienced the same problem as with the 7806 model. When I turn the selector switch to ...

maytag washer dryer stack unit , model # lse7806ace washer fills with water but won't agitate or do anything else. I had the same problem a year ago and replace the lid switch asssemby and fuse and it

...Maytag stacked unit LSE7806ACE. Load of towels put in, started load, after filled with water the machine stopped. Took out towels and still wont start. Removed water to see if it was too full. Still ...

Maytag Stacked washer it fills up but it doesnt cycle Hello, sounds like you have a faulty lid switch . The lid switch is located behind the tub in the right rear, the front panel and the washer top ...

...Maytag washer will still let it fill BUT, it will not agitate or spin. If you hear a click then there are other things to that can cause the symptom that it would spin but not agitate. Thanks for ...

my maytag Lsg 7806AAE stacked washer/dryer fills with water then stops. will not wash/rinse or drain Your lid switch is bad. Have the lid switch replaced.

...MAYTAG STACK WASHER WITH BAD LID SWITCH HOW DO I GET TO IT TO REPLACE IT ? Go here for instructions. Good luck http://www.applianceaid.com/procedures.html Please vote for me if this was helpful Leo ...

need to test to see if lid switch is the problem but don't know where it's located. It is normally at the back of the hinge of the lid. It is usually hidden in Maytag washers. Usually on the left side