Question about Ensignia 3.3 cu. ft. Top Load Washer
...washer is spinning or coasting to a stop after the spin cycle. Case: 1. Snubber damage defective. 2. Foreign material (sand/dust or grit) is on the base. Solution: 1. Replace the snubber. 2. clean ...
Question about Ensignia 3.3 cu. ft. Top Load Washer
squealing during agitation...drum seems to be 'sticking' .... the washer is cleaning clothes just fine. Just a very loud and annoying noise during the agitation period. I worry this will lead to ...
squealing noise during spin cycle. Please keep in mind, I'm attempting to diagnose your unit without being there and with very little information. From my experience, I would think you have a bad belt
Question about Ensignia MAV4758AWW Top Load Washer
...washer back and slip your belt off the pulleys and turn them by hand to see if you can identify the culprit. the pump should be the pulley all the way in the back right hand corner. Look between the ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions