Questions & Answers for: Ford Laser match point

...possible to do. mark everything....every wiring harness, coupler, hose. everything. then you can match up to new engine. Take your time, and you could get a Chilton's manual for the car and it ...

replaced dizzy, rotor, carby ... car will start but not idle and is a little rough feeling. help !! Leads and plugs appear fine. make sure leads are all connected to the proper plugs! is it a 4 or 6? ...

there is a pipe at the back of the manifold on pointing to the LH side of the car, it looks like there was a rubber tube that would have slipped over it clipped but cant find where the other end would

After replacing my timing belt on my 2002 ford laser 1.6 litre engine, now it stalls, I made sure that all timing marks matched and that all wires were refitted? if engine is computer controlled,then ...

1985 Ford Laser, I want to know what wires/colour match new wires/colour when installing a new car stereo and speakers? do it the old fasion way i have never used diagrams for splicing iht existing ...

...point gap of ford laser 1983 where I come from - we always used a match book cover to set the gap on the points and then used a dwell meter while the car was running. the match book cover sounds a ...

I have been told the oil leak in my 1996 Ford Laser may be coming from the distributor o-ring. The mechanic said it will cost me over $200 to replace, although from what I have read, the part ...

orange light I have a little orange light on my dashboard that has been coming on and going off when i am driving as of late. it is right next to the petrol thing on the dashbaord. What could this ...

My ford 2000 automatic car has trouble changing gears, revs stay the same, also the overdrive button light goes on when pressed, but it does not respond, ie the revs stay the same. Was serviced 3 week

My 2002 ford laser stall while driving without any notice, and car re start after 3 to 5 min. You probably have a bad Crank sensor or a bad Cam position sensor. Always check the OBD II codes when it ...