Questions & Answers for: matage washer

To replace part #1477, female hinge part for lid How do I get the top of the PAV2300AWW Matag washer off so I can get to the screw that holds the part #1477, female hinge part for lid off? My old ...

Matag washer may be leaking, esp when in use. There is water on the floor around where my washer and water heater is located. The WH pan is dry so I suspect the washer is leaking. I have claened up ...

The Matag washer I own will fill and then start spinning slowly. The speed does increase during the actual spinning cycle. Probably a broken brake spring.

matag top load washer wont spin or empty when the washer gets to the spin cycle it just stops ...wont spin or empty Set the timer for manually for the spin cycle and trun it on. If it does not spin ...

MATAG NEPTUNE WAHER LEAKS FROM FRONT DOOR MY MATAG NEPTUNE LEAKS FROM THE FRONT DOOR WHEN GOING THROUGH WASH AND SPIN CYCLE. MY MODEL # IS MAH55FLBWW. CAN YOU TELL ME WHAT THE PROBLEM MAY BE?? HELP, I

matag alantis no cold water i have a matag alantis problem hot water goes in but no cold water intake screen was dirty cleaned that but cold water still wont go into machine check to see if you have ...

my matag atlantis just stopped working. It will my matag atlantis just stopped working. It will not fill with water or anything? It stopped working after I opened the lid while it was in spin mode. Is

matage neptune mah8700aww purchased five years ago started leaking into my riser drawer . and my dryer mde9700ayw goes caclunk everytime it spins . only five years old for a family of 3 seems a little

How do I check the drain pump on Maytag neptune washer I have a matag front load washer MAH6500AWW the door won't lock it just clicks

Question if my matag washer model# pav2300aww will not spin out and is suspected to have a bad thrust bearing would the washer still agitate with a bad thrust bearing. Thank u for your time. you may ...