...master volume knob off. I've tryed to pull it off, like most guitars, but it wont scome off. Not only that but i also need to know how to set the intonation on it. its alot different from normal ...
Question about MG100HDFX 100-Watt Amplifier Head
...that channel usually has to be almost all the way down on the master. After all, the gain or drive knob is nothing but a built in distortion box which also drives the volume up going into the
Question about Mr 8hd CD 8 Track Recorder with CDr
need to have an EXTERNAL EQ unit and loop the vocal through that unit to do EQ to do it right. When mastering, the "powerful/natural/and bright would be filters that will emphasize the bass (powerful)
Question about Mr 8hd CD 8 Track Recorder with CDr
...MASTER volume control is turned down as well as the inout volume control. The other problem is your GUITAR may be too "HOT" meaning it has a preamp in it that generates a high level of output that ...
...built in the unit, so you might make a simple resistive mixer taking the "Master out" left and right using 1K ohm resistor from each to a common point that feeds the subwoofer. Tie the grounds of the ...
Question about Mr 8hd CD 8 Track Recorder with CDr
...built in reverb / echo effects processor (1/4" jack effect out), Monitor with 7 band Eq., effect return & master knobs, Master with 7 band Eq., effect return & master knobs. 2 RCA jacks ...
Usually answered in minutes!
297 Questions
192 Questions
155 Questions
161 Questions
136 Questions