Questions & Answers for: Ford F-100 master

Question about 1981 F 100

1 Answer

Put all new brakes on 1968 ford f-100 Shoes-Spring kit-Wheel cylinders-Master Cylinder brakes pump up and hold while foot is on pedal remove foot and pedal will go to the floor. Any Suggetsions Have ...

Ad

Question about 1981 F 100

2 Answers

1976 ford f100 pickup 2wd front brakes are holding after i drive 3 or 4 mile. I put new brake line,master cylinder,and caliper.I done all the bleeding of the lines out and it still holds. Did you ...

Ad

Question about 1981 F 100

1 Answer

master cylinder f100 what kind of master cylinder do i need to ask for to make sure that i get the right one because ever parts store will show you a dif. one. Hi, The correct master cylinder may ...

...if this doesn't. Check to see if you are leaking brake fluid anywhere and if you have enough in the master cylinder. If you have a leak see if you can stop it. Another answer it could be is a bad ...

brake lights will not come on signal lights work new master cylinder in a 1966 ford 1/2 ton there should be a brake switch either in the hydraulic line some where or on the pedal up under the dash . ...

can break master cylinder (kit) do as good job as a new master cylinder? This is a Yes, and No reply. YES, if the mechanic insures that the bore of the brake master cylinder, is free of rust pits, and

What is the correct order of parts for a 1947 ford master cylinder or where can I find a diagram of this. Go to faxonautoliterature.com. They carry dealer service manuals for all makes and models. ...

Are both sides of the master cylinder supposed to have fluid? yes they are. Hi Yes both sides should have fluid...Add some brake fluid to the empty side,step on your brake pedal a few times and you ...

Question about 1981 F 100

1 Answer

I have a 1980 ford truck. I replaced my calipers, brakes, rotors, master cylinder, and porportioning valve. My brakes are still not releasing. i have ran acrossed several times where the rubber hoses ...

Question about 1981 F 100

1 Answer

...it makes no noice. So I looked under the hood and realized it had no power break booster just the master cylinder conected right to the firewall. Is this common did they not come with them that

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2004 Ford F150
2004 Ford F150

2,636 Questions

Manuals & User Guides

Loading...