Questions & Answers for: Chevrolet master

1973 F250 TRUCK 4X4 BRAKE PEDAL GOING TO THE FLOOR REPLACED THE MASTER CYLINDER, BLED THE BRAKES. WHEN PUMPING THE BRAKES, THE PEDAL BUILDS UP, WHEN RELEASED AND YOU WAIT FOR 5-10 SECONDS THE PEDAL ...

Ad

...cavalier need instructions on how to do this myself get ready for some work.you need to remove the master cylinder nuts that hold master cylinder to brake booster.once you remove nuts you have 2 ...

Ad

Question about 2001 Silverado 1500

1 Answer

power assist leaking between master cylinder Is the power assist seal repairable or must it be replaced? If it is leaking fluid between the booster and the master cylinder, you need a new master ...

can not get a pedal, replaced master cylinder twice, bled everything, no pedal...can't seem to get fluid out of the 3 front ports on the master cylinder...could both master cylinders be defective, or ...

...went on... brake fluid appears okay. 1996 cavalier If there's no leaks ( check back of tires ) your master cylinder is by passing, replace master cylinder and bleed brake system to get all air out of ...

Question about 1997 Astro

1 Answer

how to replace master cylinder. what is the relationship between it and the power steering? If you have a hydor booster the power steering pump runs your power brakes, make sure power steering level ...

Question about 1997 Astro

2 Answers

1971 chevy 3/4 truck, front disc and back drums, i lost all brakes. Thought it was the master cylinder because the rear master cylinder port emptied itself of all fluid and no leaks on the rear wheel ...

...chevrolet cobalt clutch issues I had a stage 2 excedy racing clutch installed in my car then the master cylinder went so i had the master cylinder replaced. Now the new master cylinder wont hold ...

...7-8 times starting at the rear and all the way around Sounds like you may have an air bubble in the master cylinder. The most effective way to deal with that is getting a master cylinder bleeder kit ...

Question about 1995 K1500

3 Answers

2008 chevrolet trailblazer Where is the master brake pressure sensor Probably in the side of the master cylinder hi Randy. see if this link helps you to find it. 2008 chevrolet trailblazer Where is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...