mark 8,and when i was installing it,i realized that the gas hand went straight up (before full) and the sensor that tells me my status about the car went blank, what do you think it is and how would i
...lift it off and shine a torch into the hole. The flywheel and timing marks should be visible. Timing mark is in portal over flywheel on a 3 cylinder and on the harmonic balancer for the 4 ...
...on. mark a dot on the main body where the white strip is. lift he screen of and line the light bar with the mark you have drawn. put it all back together and start it up. hopefully it should work
feeds ok from tray 1 but not tray 2 which is 11x17. There are slight buffed marks at on the papaer in 4 spots but paper wont advance. marks are about 1/4 inch long those marks are the rollers trying ...
timing marks on a 2000 volvo v40 1.9t crank and cam marks Timing belt alignment markings Here is all the tech info for removing and replacing....hope this helps you: 4-Cylinder Engine Before servicing
...Mark #2), and then lift the distributor straight out and you should now have two separate reference marks for installing the new distributor. Be sure that the new distributor has a new gasket or seal ...
...mark grill Modle #Y0101XC Once you remove the cooking grates and the flame tamers, the burner(s) will simply lift out. Lift the end farthest from you (when standing at the front of the grill) and as ...
...Mark VII air ride suspension trouble shooting Front will not lift when car is running. Back lifts up . Most likely have a leak in the front air system. Could be a line or one o the air bags. Could ...
CAMTIMMING MARKS PLEASE ENGINE 160 A YOU GOT A PLASTIC COVER BEHIND CAM PULLEY THERE IS A PIECE YOU MUST LIFT UP AND ALIGN MARK ON CAM PULLEY AND ON CRANK NEED TO LINE MARKS ON TDC AND ROTOR ON NO 4
Question about 1995-98 Chevy/GMC Silverado/Sierra 1500 4WD 3 Body Lift
1995 gmc sierra 1500 no spark from distributer to plugs, check distributer cap for burnt marks . also check rotor for rust marks burnt marks this can cause it from firing up try replacing parts
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
