Questions & Answers for: BMW 328 manual roof

Question about 1999 328 Series

1 Answer

...the roof lid the other brings the roof up or down. These motors can be engaged and disengaged manually. First check that the motor's are working. If the motors are working. Then engage and ...

Ad

Question about 1997 328

2 Answers

...the top did not move although the top storage lid motor was jammed into the housing and I had to manually knock it out to release to top cover. Can you help me. If this cost me any money please ...

Ad

...manual on the car. The top will not go up or down when you hit the biutton. Can the top be raised manually on a 1996 328 ci? If yes, can you provide instructions? Thanks so very much.John Paul I just ...

...manual release mechanism on the top won't open. I believe they are connected with a fuse. If so where is the fuse? That is not the problem the problem is your convertable roof is not closing properly ...

...the trunk open and began putting the top down. the roof lid became wedged between the open trunk. I manually pulled them apart. So when I tried to put the top down again the bottom part of the ...

...of a manual version for 47 quid, all the holes and templates are there tofit them. The roof unlocks from the windscreen with the button and then it is manual, it's quicker to get the roof down ...

...means that they are not engaged. To re engage simply push them back into place. Before re engaging manually bring up the roof and then press the roof sequence button. To make sure that the roof ...

roof opening button is flashing and roof wont open SEE IF YOU CAN FIND THE MANUAL, START BY CHECKING THE FUSES. OR IT MIGHT BE FLASHING, CUASE SOMETHING IS STICK PERVENTING THE SUN ROOF FROM OPENING.

Question about 1999 328 Series

1 Answer

...roof light is flashing. now I can not open the trunk. We tried taking the back seat out (instructions in the owner's manual) to no avail. Can you help. I can't afford to fix the top, but I do need to ...

Question about 1997 328

1 Answer

...it i think clockwise. If the gears are stripped it wont work...but if its just the motor then manually turning the gear should close it. I figured out which way it needed to be turned to close ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...