Questions & Answers for: manual focus

...Manual Focus), and S-AF/MF (Simultaneous mode). (SINGLE Auto Focus): Focusing is performed once when the shutter button is pressed halfway. C-AF (CONTINUOUS Auto Focus): The camera repeats focusing ...

...manual focus How Do I Switch To Manual or Auto Focus? AF/MF (Auto Focus/Manual Focus) * The AF/MF function works in CAMERA, M.REC mode only. * In most situations, it is better to use the automatic ...

Manual focus How do I control the Manual Focus? 1) Press and Hold the FOCUS button until to you "MF" appear in the lower left corner of the LCD Display on the back of the camera. Then you can release ...

Manual Focus How do I control the Manual Focus? 1) Press and Hold the FOCUS button until to you "MF" appear in the lower left corner of the LCD Display on the back of the camera. Then you can release ...

manual focus and manually focusing on the subject. Some combination of focus size and focus type may not focus unless the sensor sees a subject and is in focus. So if the sensor cannot see and know it

...Focus - Manual" selector switch. Make sure the selector is set to "AF" for auto focusing. Your lens may have a similar focus selector switch on its barrel. There are two types of switches used - ...

manual focus is available in part 2 of the manual, page 40. The manual is available as a PDF here: http://ca.konicaminolta.com/support/manuals/film-cameras/film_af_slr/index.html#si_series . It is the

manual focus. Two ways to do that. 1. There is a switch on the lens which allows you to select auto or manual focus. Be sure the switch is set on A or A/M. If it's on M, you are on manual focus. 2. In

...manual focus and auto focus, does not appear to operate normally. Maybe I do not know how to use it, however I cannot manual focus. Are you familiar with this camera and the switch controlling the ...

Manual focus 'clicking', rather than smooth I bought this Lens second hand without a manual. So there is probably an easy solution. But When in manual focus mode, the focus ring 'clicks' rather than ...