Questions & Answers for: Pontiac Bonneville manifold

2000 bonn. super charge intake manifold gasket help please we had a leak on the intake manifld gasket on our bonn. super charge. we had the gasket replaced and when we picked the car up it has white ...

...But take a look at all of the info: VIN K EngineOn these engines, the upper and lower intake manifolds must be removed separately. Properly relieve the fuel system pressure, as outlined in ...

I have a 1978 trans am with a 403 and have no brakes. does the booster use manifold or ported vacuum? Hi: You should have brakes, but a really hard pedal to push, if your booster has no vacuum. If ...

need to replace intake manifold how do you do this Bonneville, LeSabre, Park Avenue 2000-2005 Intake Manifold - Removal & Installation 3.8L Engine VIN 1 Engine Before servicing the vehicle, refer ...

how long does it take to replace a intake manifold and on a scale of 1 to 10 how hard are they to replace it does not have the super charger I assume you want to replace the upper manifold only. book ...

where is the cooling line that goes to the intake manifold 380engine There is not a cooling line that goes to the intake manifold. It's for air only

need to put in the air intake manifold you need to buy haynes repair it will show and tell you how to remove and install intake manifold, you will mechanic basic tool set and a torque  wrench.

...for my 2000 pontiac boniville 3800 series 2 i need to know the fireing order Look on the intake manifold on the drivers side of the engine. It should be cast into the

on the gas but car won't stay going what could it be Vacuum leak or manifold absolute pressure sensor is faulty. As rpm's increase, manifold requires more vacuum to pull fuel into the intake. If there

...to the MAP sensor or barometric pressure sensor, and the sensor most of the time is on the intake manifold or on the fire wall connected by a small hose to the intake ...