Questions & Answers for: makes pool pump surge

Question about Simer/Flotec/Omni 2105 Swimming Pool Cover Pump

1 Answer

...pool ( 1 1/2 lines ) on 220v hookup--does not build up full pressure--water surges & never fills trap up full. When I replace with a 1HP Starite maxiglas-everything works fine. I bought the Flotec ...

Ad

Question about 2HP Pool Pump Motor A O Smith Electric Pool Motor for 56J Frame

2 Answers

...Pump Motor is getting electricity but won't star I tested the electrical connections and the motor is getting electricity, but won't turn on. There was recently a power surge to the line. Is there ...

Ad

Question about SAND FILTER, PRO SERIES

1 Answer

pool when shut off power to pump turned off and there begines a surge of water in lines which causes a water plume in deep end of pool. Air bubbles in pool inlets and at clean out canister just before

Question about SQ1102 Pool Pump Motor

2 Answers

makes a surging sound THIS WILL HAPPEN WHEN BEARINGS START TO FAIL. IF THE MOTOR IS FAIRLY NEW ,LESS THAN A YEAR .RETURN IT ASAP. I HAVE FOUND THAT THE REAR END BELL CAN ALSO FAIL IF YOU TAKE THE BACK

Question about SAND FILTER, PRO SERIES

1 Answer

pool motor surges when using vacuum. not sure if its a motor problem Could have air in your vacume hose line. Make sure vacume hose is full of water before hooking it up

Question about SP3015X20AZ 2 HP SUPER PUMP II SP3015X20AZ

1 Answer

makes it hard for the pump to pick up the water. i would check the impeller and shaft seal,and basket for cracks, if the basket is cracked 99% of the time the impeller is plugged ..shaft seal there is

...pool has a hayward booster pump but don't know the brand of main pump & motor. check top seal make sure its not damaged if ok check to see if intake union is tight if still bad check impeller ...

Question about 1.0 Hp Whisperflo Pump

1 Answer

how do I clear an air in a j345 jacuzzi my jets were surgeing for awhile now I have an fl1 code coming up on the control panel I think its an air lock how do I get rid of it. make sure all the unions ...

Question about 1.0 Hp Whisperflo Pump

2 Answers

...surge and it tripped the breaker. The heating element failed so we replaced it the control panel says the heater is coming on and we hear a click but the heater is not warming up. Any clues? have you ...

...pool pump for filtering once a day. Lately, I've been waking up to it running at 4:00 in the Am, for no apparent reason. I've reset the EEProm, but it doesn't seem to help. Is there anything that I ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

David Spradling
David Spradling

Level 3 Expert

13520 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...