...MR5 studio monitor to my tripod stand? I am afraid to drill holes in the bottom of the monitor, because I don't want to hit anything important on the inside of the speaker, hence the sub. How much ...
my high end stopped working in both my speakers First thing is to run a known signal from a simple device like a small CD player to verify the problem. If these are driven from a mixer, the EQ could ...
...MR5's is not working. Running through Mbox2 mini to Pro Tools 8. I have tried everything I can think of. The cables are good, the mbox is fine, and everything in Pro Tools looks fine. Is this monitor ...
Appendix A: Service Info in this guide http://www.mackie.com/products/mr5/pdf/mr5_om.pdf under No Power section, and if the fuse it not blown, try some of the solutions under No Sound. Hope this helps
monitor stopped playingbass and is now only playing highs tried turning it off checked connections nothing,other speaker is working fine. Sound like either the crossover or the driver has blown or, if
Question about MR5-MK2 5" Powered 2 Way Reference Monitor
loud buzzing when turn on, no input signal Have been using these fine for a year, then all of the sudden the right monitor started emitting a very loud static/buzzing noise. At first I thought maybe I
Question about MR5-MK2 5" Powered 2 Way Reference Monitor
MR5 Mk1 studio monitor. The HF driver works; the LF driver does not. What's wrong? and only the HF driver works there is no sound from the LF driver The driver is not blown and the wires are connected
Usually answered in minutes!
297 Questions
192 Questions
155 Questions
161 Questions
136 Questions