Questions & Answers for: mac spins startup

...Mac Laptop with the disk it came with, but, soon after It just went black. I could hear that it is on but the screen is black. Try starting in safe mode, this usually bypasses the graphics drivers, ...

...startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically. During startup in Mac OS X 10.2 through 10.3.9, you will see ...

...startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically. During startup in Mac OS X 10.2 through 10.3.9, you will see ...

...startup. So I recommend you boot your Mac into Safe Mode to see if you can't remove a possible folder(s) that may be affecting your Mac's start up function. Try these steps: -SAFE BOOT MODE- ? Reboot ...

...startup chime. Same result, gray spinning wheel no start up. If you have your Mac OS X Install disc, insert it into the drive. Restart the computer and hold down "C" while booting. Choose your ...

How do you start in safe mode? I started with power and shift. Then what do I do? To start up in safe mode: Shut down your computer and wait 10 seconds. Press the power button. Immediately after you ...

...Mac OS X Startup disk •Reboot your Mac •At the Apple Chime, press the C key and hold it until you see a White screen, gray Apple and eventually a Spinning gear. • Release the C key only after you see ...

...startup, this should set the Mac in "target" mode, allowing you to use it as an external hard drive. Then connect the firewire cable between the two macs. On the mac that is OK, you should see the ...

startup disk and then hit return. The mac should boot up normally. then immediately go into the System preferences and choose the StartUp Disk icon and make sure you select your harddrive as the start

...Mac normally without holding down any keys during startup. If you can boot in safe mode, you have something on board your computer that's interfering with startup. If you've recently installed ...