Questions & Answers for: Saeco ODEA lubricate brew unit

Ad

odea giro plus gear that drives the brew group has broken 3 times The gear that drives the brew group has broken 3 times. we have had it fixed each time and now it is outside the warranty date. What ...

Ad

Question about Odea Giro Plus Coffee Maker

1 Answer

...The lube is for the o-rings on the brew unit, and the ones on the white plastic valve behind the brew unit. As for the light there might be something a little coffee grounds keeping the door

Ad

...brew unit and the machine still does not work Our machine now does not brew the coffee and spits out a steady stream of hot water from the spout in excess a cup. we have cleaned the brew unit as per ...

Question about Odea Giro Plus Coffee Maker

3 Answers

...brew. So once, it starts running milky, you can stop the cycle. I hope this helps. I know I've been struggling and cursing the machine for a while :) not really a coffee expert myself but if your ...

Question about Odea Giro Plus Coffee Maker

1 Answer

...brew unit. Talea Giro The triangles indicating the rest postion are not lined up. The unit is still in the machine. The triangle is at the 12 o'clock position and it needs to be in the 3 o'clock ...

Question about Odea-Giro Espresso Machine

1 Answer

...the grounds), it will increase the grinding until it reaches the optimum dose. So it is important to clean and lubricate the brew unit at all times. Hope it will solve the problem. Good

Question about Odea Go

2 Answers

...under the dreg drawer. how I can fix it ? I recently had this problem. I throughly cleaned and lubricated the brew group as directed by the manual. Apparently if the brew group doesn't move ...

...I can personally confirm this fix from another similar question works: "I throughly cleaned and lubricated the brew group as directed by the manual. Apparently if the brew group doesn't move ...

...brew unit so I noticed that I can put the brew unit all way up. The upper light flashes when it reaches the top but the problem is that a second after it starts its movement from the lower point the ...

...brew unit gets stuck and if removed in order to reset the alignment of the gearing wheel in the machine, it does not align in order to get the brew unit back in place. Problem started when descaling ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...