Questions & Answers for: low side port

...low side adapter may be hard to find though. If youcan not find it there, it is possible that the low side port could possibly be at the dryer on the drivers side front up beside the condensor By the ...

...low side port for recharging a/c. on my 1997 s10. I found 2 ports one on the accumulator and one on the tube, however my charging kit port only fit the port on the accumulator. I assume this port is ...

...low side, that the one you recharge in, and the big one is high side.Hope this was very helpful. On A/C, there are only 2 ports. One smaller than the other. The small port is your suction (low side) ...

...low side ports are located on the 'thicker' plumbing vs. the 'thinner' plumbing coming off of the compressor. Just follow the low side pipes from the compressor to the first low side port. It should ...

low side port for ac charging on 1997 gmc jimmy The low side port is always the smaller fitting on the larger line. The high side is always the larger fitting on the smaller line. They do this so that

...low side service port, but I am having problems figuring out which one is the low side service port The R134A connection hose will only fit on the low side service port. The high side port is bigger ...

...low side port A/C low side service port location on 93 pickup The low side port is in the low side line from the AC compressor, this is the larger of the two lines from the compressor. The charging ...

...low side-(fill side) used to put freon in a 99 mercury mystique 6cylinder Hello, the low side is normally the one closest to the big silver tank looking thing, also if you bought a refill kit at a ...

...side The low side A/C service port is located in the low side line nearest to A/C compressor. Due to the design of low side hose, it is difficult to see. When looking down to locate the port, the low ...

...low side a/c port 2003 lincoln ls v6 Todd, Low side A/C port, Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. ...