Questions & Answers for: low rpm hesitation

Question about 2002 Grand Am

1 Answer

low rpm's 02 grand am, has slight hesition, at low rpm's. (example after a shift from 2nd to3rd). already replaced ignition module, coil pack spark plugs, converter, fuel filter,and had fuel injecters

Ad

...low rpm, hesitation The exlamation light in my 2000 ford focus comes on for 30 seconds and then cuts off sometimes when I'm driving. When at lights and the car is at low rpm there is a consistent ...

Ad

low rpm feels My 1995 prelude H22a1 has sluggish acceleration from low rpm feels ''boggy''. bled cooling system improved greatly, still has hesitation and sluggish low rpm, any ideas? how do i tell if

and surges on acceleration. Any ideas? Car seems to run fine other than low rpm issues. coolant temperature sensor could be faulty, making fuel mixture too lean. will hesitate and feel flat until warm

struggles at low rpm does great on the high way hesitates and runs rough below 2000 rpm anything above that is usually fine. Sounds like you have a vacuum leak. Any check engine light?

Question about 1987 3 Series

1 Answer

...it and used throttle body cleaner to flush it out. Ever sense the truck has had hesitation issues at low speed and low RPM's. Any suggestions? Maybe some gunk got into the idle air passageway

...hesitation at low rpm light backfire and car jerks. no probs at high rpm or at highway speed any suggestions have cleaned the Mass Air Flow ---no help Check the WOT sensor. WOT = Wide open

Question about 1985 Pickup

1 Answer

...2,000 rpm the engine hesitates or dies; engine will restart and idle fine. Distributor?? if engine idle good stall on acceleration either fuel filter clogged or fuel pump weak has low fuel

Question about 2001 Mercury Cougar - Automatic, 2.5L V6 - Performance Module

1 Answer

...low rpm, scanner says miss fire in # 6 and 2, I changed my spark plugs,cables, fuel injectors,egr valve, solenoid, fuel filter, and coil but there was no improvement. Check for intake leak(s) with ...

...the screw in a bit after the engine has reached it's highest RPM. Let it idle down . Then Accelerate hard, if it hesitates, loosen or tighten the LOW until it accelerates quickly with no

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...